- Compact with two channels for only 15mm module width
- Digital signal filter in peripheral module
- Up to 10kHz freely adjustable sampling rate
- Clocked operations / with oversampling optional
- Connection of a large number of sensors due to freely adjustable input range
- Factory calibration warranties unproblematic module switch
![]() |
-
Versatile capabilities, different versions available
-
Interferes with the load cell signal to a very small extent and is therefore approved for scales requiring verification. (SIWAREX IS)
![]() |
- Ultra-compact: 20 mm width, 65 mm height
- Fast: reaction time of digital outputs < 1 ms
- Highly accurate: resolution +/– 20.000.000 parts, up to 3 x 6000d multi-range/multi-interval scale; 0,4µV/e
- User-friendly due to webserver for service and commissioning
- Legal-for-trade in accordance to OIML R-51, R-61, R-76 and R-107
- Seamless integration in different automation systems
- Various communication interfaces ex-works
- “Ready-to-use” HMI interface and function block
![]() |
-
Uniform structure and universal communication through the integration in the SIMATIC S7 and SIMATIC PCS7
-
Application in the decentralized system concept by connecting to PROFIBUS DP / PROFINET through ET 200M
-
Weight measurement or force to resolutions of 16 million parts
-
Precision (0.5 µV per e)
-
High measuring rate of 10 ms
-
Parameter definable input and output functions
-
Flexible adjustment for various SIMATIC requirements
-
Simple parameter definition with the SIWATOOL FTC program through the RS 232 interface
-
Module exchanging without readjusting the scale is possible
-
Scale progress recording/logging
-
Intrinsically safe load cell supply for Ex-Zone 1 (optional)
-
Application in Ex-Zone 2
-
Extensive diagnostic functions
![]() |
-
Uniform design technology and consistent communication in SIMATIC
-
Measurement of weight or force with a high resolution of 65000 parts and an accuracy of 0.05%
-
Space saving through use of two-channel version for two Scales
-
Direct connection of a remote display to the TTY interface
-
Theoretical adjustment without adjustment weights
-
Replacement of module without renewed adjustment of scale
-
Simple Parameterizing with SIWATOOL
-
Intrinsically-safe load cell supply for the hazardous area zones 1,2 (optional)
-
Can be used for Ex-applications
![]() |
-
Uniform structure and universal communication through the integration in S7-1200
-
Four digital inputs and outputs, one analog output, all inputs and outputs are controllable via the SIWAREX module or via SIMATIC S7-1200
-
Operation also possible without SIMATIC CPU
-
Easy commissioning via SIWATOOL or via HMI touch panel
-
Extensive diagnostic functions
- Calibratable according type approval 2009/23/EC (NAWI)
- Calibratable according NTEP Class III / III L
-
Flexible adjustment for different requirements
-
Theoretical adjustment without adjustment weights
-
Modules can be exchanged without readjusting the scale
-
Can be used for Ex-applications zone 2
![]() |
-
Uniform structure and universal communication through the integration in S7-1200
-
Standalone operation mode without SIMATIC CPU possible
-
Modbus TCP/IP & Modbus RTU
-
6 totalizers (individual resettable)
-
Pulse signal for remote totalizer
-
Simulation mode for belt load and/or belt speed
-
Trace recorder
-
Recovery point for easy rebuild of all parameters
-
Automatic zero tracking function
-
Easy commissioning via SIWATOOL and PC or via HMI touch panel
-
Extensive diagnostic functions
-
Flexible adaption to different requirements
-
Various calibration options
-
Can be used in hazardous applications ATEX zone 2
![]() |
-
Uniform structure and universal communication through the integration in S7-1200
-
Four digital in- and outputs, one analog output on board
-
Operation also possible without SIMATIC CPU
-
Flexible connections to different automation systems via on board Modbus RTU
or Modbus TCP/IP interfaces -
High resolution of up to +/- four million parts
-
Measuring rate of 100/120 Hz
![]() |
-
Seamless integration of Integration of platform- and hopper scales into the SIMATIC S7-1500 automation environment
-
Uniform structure and universal communication through the integration in SIMATIC S7-1500
-
Integrated part of TIA portal
-
Resolution of up to +/- 4 million parts
-
Measurement rate of 100/120 Hz (effective interference suppression)
-
Automatic impedance control of the load cells, process and diagnostic alarms
-
Complete parameterization and commissioning via CPU, HMI panel or PC possible
-
Direct use in hazardous zone 2
![]() |
- Uniform structure and universal communication through the integration in the SIMATIC S7 and SIMATIC PCS 7
- Application in the decentralized system concept by connecting to PROFIBUS DP / PROFINET through ET 200M
- Weight or force measurement to resolutions of 16 million parts
- Precision of 3 x 6000 d, calibratable
- Fast dosing with fast communication
- Calibratable display with SIMATIC HMI Standard Operator Panels
- Stepless or incremental dosage control
- Exact dosage switching signals (< 1 msec)
- Definable input and output parameters
- Definable parameters for the most diverse of applications
- Flexible adjustment for different requirements
- Simple parameter definition with the SIWATOOL FTA program
- Theoretical adjustment without adjustment weights
- Modules can be exchanged without readjusting the scale
- Scale progress recording/logging
- Calibratable Alibi memory
- Can be used for Ex-applications
![]() |
-
Uniform structure and universal communication through the integration in I/O SIMATIC ET 200
-
Parameterization of the scale via operator panel, CPU or PC
-
Flexible configuration possibilities in SIMATIC TIA Portal resp. SIMATIC Step7 V5
-
Measuring of weight and force with a resolution of up to +/- 2 million parts
-
600 Hz measuring rate (high speed)
-
100/120 Hz measuring rate (efficient 50/60Hz interference frequency suppression)
-
Scale internal control of freely definable limit values
-
Easy commissioning via software SIWATOOL without SIMATIC knowledge
-
Automatic adjustment without adjustment weights possible
-
Replacement of module without a new adjustment of scale
-
Direct use in ATEX zone 2 possible
-
Various status- und diagnostic information
-
„Ready for use“ sample application
![]() |
