DatasheetEquipped with two ceramic measuring cells, the differential pressure transmitter PD82 is particularly suitable for corrosive and abrasive media. The capacitive measuring principle enables a very accurate and long-term stable measurement. The process connection is made of high-quality stainless steel 1.4404 and is therefore suitable for almost all media. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet.
Applications:
- Gaseous media
- Liquid media
- Abrasive media
- Corrosive media
- Aggressive media
- Level measurement in superimposed pressure tanks
Technical data:
| Measuring ranges | Smallest measuring range: 0…40 mbar |
| Largest measuring range: 0…40 bar | |
| Analog output | 4…20 mA, 3-wires |
| 0…10 V, 3-wires | |
| Power supply | 20 mA output: 9…30 V DC |
| 10 V output: 15…30 V DC | |
| Accuracy | ≤ ± 0,3 % FS @ 25 °C |
| Long term stability | ≤ ± 0,2 % FS / Year |
| Response time | 200 ms – others on request |
| Swich-on time | < 1 s |
| Temperature coefficient | Zero: ≤ ± 0,015 % FS / Kelvin |
| Span: ≤ ± 0,01 % FS / Kelvin | |
| Medium temperature | -25…100 °C |
| Surrounding temperature | 0…70 °C |
| Storage temperature | -40…85 °C |
| Short-circuit resistance | Permanent |
| Reverse polarity protection | Protection against reverse polarity, but no function |
| Electromagnetic compatibility | Interference emissions and immunity acc. to EN 61326 |
| Wetted materials | Process connection: Stainless steel 1.4404 |
| Sensor: Ceramic Al2O3 | |
| Sensor seal: FPM (Viton), NBR, EPDM, FFKM | |
| Protection type | IP 67 |
| Weight | Approx. 400 g |
