DWR pressure limiters are particularly suitable as pressure limiters for fuel gases (DVGW worksheet G 260) and liquid fuels (e.g., heating oil), as well as for steam systems according to TRBS and hot water systems according to DIN EN12828, systems according to DIN EN12952-11 and DIN EN12953-9. The DWR-205/-206 is used to limit maximum and minimum pressures and features an internal locking mechanism. Important: When selecting the limiter, it must be decided whether the device is to be used for maximum or minimum pressure monitoring. The direction of operation cannot be reversed on the pressure limiter. It has a robust housing made of seawater-resistant die-cast aluminum.
Features & Benefits:
- The DWR-205 series is calibrated for rising pressure. This means that the adjustable switching pressure on the scale corresponds to the switching point at rising pressure.
- The reset point is lower by the amount of the switching differential. (See also page 23, 2. Calibration at the upper switching point).
- The DWR-206 series is calibrated for falling pressure. This means that the adjustable switching pressure on the scale corresponds to the switching point at falling pressure.
- The reset point is higher by the amount of the switching differential.
- Burst pressure for all types ≥ 100 bar, tested by TÜV.
- The sensor is of “special design” through testing with 2 million cycles.
Certifications:
- TV.DWFS (SDBFS).17-281 according to VdTUEV-Pressure 100 Guideline Edition 03.2017
- DIN EN 12952-11:2007 and DIN EN 12953-9:2007-ID 0000035004 according to DIN EN 764-7:2002 and DIN EN 13611:2008-ID 0000020757 according to VdTUEV-Pressure 100 Guideline
- Edition 4.83-CE-0085CL0343 according to DIN EN 1854
- Edition 01.10.2010
- SIL2 according to IEC 61508-2
Specifications:
- Maximum Operating Pressure: 16 bar (air pressure)
- Minimum Operating Ambient Temperature: -25°C
- Minimum Pressure Setpoint: 0.5 bar (air pressure)
- Maximum Pressure Setpoint: 6 bar (air pressure)
- Pressure Type: Overpressure Relative | sobrepresión relativa | sovrapressione relativa | surpression relative | Überdruck relativ
- Brand: CentraLine | Honeywell
- Connection Type: Internal Thread G1/4 in, External Thread G1/2 in