PM620 and PM620-IS pressure modules

from 1,787.00 €
plus VAT

Options & pricing

PM620IS: from 2.238,00 €


PM620

  • Digital pressure modules with simple screw fit — hand-tight, no tools required.
  • Fully interchangeable; no set-up or recalibration required after module change.
  • Pressure ranges from 70 mbar to 1,000 bar (≈ 1 to 15,000 psi).
  • Total uncertainty from 0.025% FS; stable performance across the specified temperature range.
  • IP65 sealed, robust construction; wetted parts compatible with stainless steel.
  • Compatible with DPI612 pressure calibrators and DPI620G/DPI620G-IS.
  • Resolution 4–7 digits, orientation effect < 0.2 mbar/g; CE/UKCA & RoHS compliant.

PM620-IS

  • All benefits of PM620, plus intrinsic safety approvals (ATEX/IECEx).
  • Suitable for Zone 1 / hazardous areas, marking e.g. Ex ib IIC T4 Gb (−10 °C … +50 °C).
  • Tool-free screw fit for pressure and electrical connection; fast module change.
  • Compatible with DPI612 and DPI620G-IS in hazardous areas.
  • IP65, rugged industrial design; wetted parts stainless-steel compatible.
  • High accuracy and stability; 4–7 digit resolution, confidence level 95% (k=2).
  • Ideal for service, maintenance and on-site calibration in hazardous zones.

Datasheet
Add to your Quote List

Features

  • Fully interchangeable, no set-up or calibration required
  • Simple screw fit — hand-tight, no tools needed
  • Versions for safe and hazardous (Ex) areas available

The PM620 series is the latest development in digital pressure sensor technology and includes several key
innovations that enable re-ranging of the pressure range on compatible instruments. A simple screw fit
makes both the pressure and the electrical connection — without tools, sealing tape, cables or plugs —
and digital characterization allows interchangeability without any set-up or calibration.

The PM620LP provides true differential measurement via a fitted low-pressure hose-barb connection (LP)
and is supplied with one hose-barb high-pressure connection (HP) for a PV624 test port, one equalization valve,
and 1 m (3.3 ft) of silicone tubing.

The PM620T additionally integrates our unique TERPS resonant-silicon pressure sensor technology,
providing up to four times higher stability and higher accuracy.

Ranges & total uncertainty

PM620

  • Ranges: from 70 mbar to 1,000 bar (≈ 1 to 15,000 psi)
  • Total uncertainty: from 0.025 % FS

PM620 – Specification

Maximum intermittent pressure 2 × FS
Maximum working pressure 110 % FS
Sealing IP65 (protection against dust & water jets)
Operating temperature −10 to +50 °C (14 to 122 °F)
Storage temperature −20 to +70 °C (−4 to 158 °F)
Humidity 0 to 90 % RH, non-condensing
Shock & vibration BS EN 61010-1; MIL-PRF-28800F (Class II); 1 m drop test
EMC BS EN 61326-1
Electrical safety BS EN 61010-1
Pressure safety Pressure Equipment Directive, class SEP
Approval CE & UKCA marked; RoHS compliant
Dimensions & weight L 56 mm, Ø 44 mm, 106 g max.
Orientation effect < 0.2 mbar/g
Media compatibility Media compatible with stainless steel
Resolution Selectable, 4–7 digits; uncertainty confidence level: 95 % (k = 2)

PM620-IS – Specification (differences vs PM620)

Approval CE and UKCA marked; ATEX & IECEx intrinsic safety:

Ex ib IIC T4 Gb (−10 ≤ Ta ≤ +50 °C)

Intrinsically safe (USA & Canada): Class 1, Zone 1, AEx/Ex ia IIC T4 (−10 °C ≤ Ta ≤ +50 °C)
Compatibility With non-corrosive gases/media; wetted parts stainless steel

Notes

  1. The reading can be referenced to ambient air pressure via a DPI620 Genii software feature; the same module can therefore be switched between absolute and gauge measurement.
  2. NLHR = non-linearity, hysteresis and repeatability (to the reference standard).
  3. Total uncertainty includes the standard uncertainty, NLHR over the specified range and 1-year drift.



Absolute pressure ranges (referenced to vacuum)


bar psi Medium NLHR @ 20 °C (24 h) %FS NLHR @ 0..50 °C %FS Total uncertainty 0..50 °C %FS

–>







pm620 n
pm620 n2
pm620 n3
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    PM620 and PM620-IS pressure modules

    from 1,787.00 €
    plus VAT

    Options & pricing

    PM620IS: from 2.238,00 €

    pm620 n
    pm620 n2
    pm620 n3

    PM620

    • Digital pressure modules with simple screw fit — hand-tight, no tools required.
    • Fully interchangeable; no set-up or recalibration required after module change.
    • Pressure ranges from 70 mbar to 1,000 bar (≈ 1 to 15,000 psi).
    • Total uncertainty from 0.025% FS; stable performance across the specified temperature range.
    • IP65 sealed, robust construction; wetted parts compatible with stainless steel.
    • Compatible with DPI612 pressure calibrators and DPI620G/DPI620G-IS.
    • Resolution 4–7 digits, orientation effect < 0.2 mbar/g; CE/UKCA & RoHS compliant.

    PM620-IS

    • All benefits of PM620, plus intrinsic safety approvals (ATEX/IECEx).
    • Suitable for Zone 1 / hazardous areas, marking e.g. Ex ib IIC T4 Gb (−10 °C … +50 °C).
    • Tool-free screw fit for pressure and electrical connection; fast module change.
    • Compatible with DPI612 and DPI620G-IS in hazardous areas.
    • IP65, rugged industrial design; wetted parts stainless-steel compatible.
    • High accuracy and stability; 4–7 digit resolution, confidence level 95% (k=2).
    • Ideal for service, maintenance and on-site calibration in hazardous zones.

    Datasheet
    Add to your Quote List

    Features

    • Fully interchangeable, no set-up or calibration required
    • Simple screw fit — hand-tight, no tools needed
    • Versions for safe and hazardous (Ex) areas available

    The PM620 series is the latest development in digital pressure sensor technology and includes several key
    innovations that enable re-ranging of the pressure range on compatible instruments. A simple screw fit
    makes both the pressure and the electrical connection — without tools, sealing tape, cables or plugs —
    and digital characterization allows interchangeability without any set-up or calibration.

    The PM620LP provides true differential measurement via a fitted low-pressure hose-barb connection (LP)
    and is supplied with one hose-barb high-pressure connection (HP) for a PV624 test port, one equalization valve,
    and 1 m (3.3 ft) of silicone tubing.

    The PM620T additionally integrates our unique TERPS resonant-silicon pressure sensor technology,
    providing up to four times higher stability and higher accuracy.

    Ranges & total uncertainty

    PM620

    • Ranges: from 70 mbar to 1,000 bar (≈ 1 to 15,000 psi)
    • Total uncertainty: from 0.025 % FS

    PM620 – Specification

    Maximum intermittent pressure 2 × FS
    Maximum working pressure 110 % FS
    Sealing IP65 (protection against dust & water jets)
    Operating temperature −10 to +50 °C (14 to 122 °F)
    Storage temperature −20 to +70 °C (−4 to 158 °F)
    Humidity 0 to 90 % RH, non-condensing
    Shock & vibration BS EN 61010-1; MIL-PRF-28800F (Class II); 1 m drop test
    EMC BS EN 61326-1
    Electrical safety BS EN 61010-1
    Pressure safety Pressure Equipment Directive, class SEP
    Approval CE & UKCA marked; RoHS compliant
    Dimensions & weight L 56 mm, Ø 44 mm, 106 g max.
    Orientation effect < 0.2 mbar/g
    Media compatibility Media compatible with stainless steel
    Resolution Selectable, 4–7 digits; uncertainty confidence level: 95 % (k = 2)

    PM620-IS – Specification (differences vs PM620)

    Approval CE and UKCA marked; ATEX & IECEx intrinsic safety:

    Ex ib IIC T4 Gb (−10 ≤ Ta ≤ +50 °C)

    Intrinsically safe (USA & Canada): Class 1, Zone 1, AEx/Ex ia IIC T4 (−10 °C ≤ Ta ≤ +50 °C)
    Compatibility With non-corrosive gases/media; wetted parts stainless steel

    Notes

    1. The reading can be referenced to ambient air pressure via a DPI620 Genii software feature; the same module can therefore be switched between absolute and gauge measurement.
    2. NLHR = non-linearity, hysteresis and repeatability (to the reference standard).
    3. Total uncertainty includes the standard uncertainty, NLHR over the specified range and 1-year drift.



    Absolute pressure ranges (referenced to vacuum)


    bar psi Medium NLHR @ 20 °C (24 h) %FS NLHR @ 0..50 °C %FS Total uncertainty 0..50 °C %FS

    –>







    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info