DatasheetThe TEC version will soon be available as an addition to our TMC-2001 device series.
This battery tester has been specially designed for all measurement functions at block level. Two input ranges are available for recording the block voltages. A ±24VDC (resolution 0.0001V) and a ±100VDC (resolution 0.001V) range. The impedance can be recorded for various signal forms and frequencies, which may be specially adapted to the block type used. The superimposed AC voltage is recorded with up to 1.6Vrms.
All recorded measured values can be viewed on site. If desired, individual measured values can be easily re-measured at a later date.
Users of the TMC-2001TEC can obtain our free CS-Manager battery management software. Complete databases (e.g. 1000 battery definitions) can be transferred to the TMC. The already integrated RFID transponder function effectively supports the selection of the battery system to be tested. In this case, the device is simply held over an RFID tag and then automatically selects the battery. There is no need to scroll through sometimes hundreds of battery entries.
Intuitive user guidance facilitates on-site measurement recording.
Once the measured values have been transferred to our battery management software, various graphical and tabular analysis options are available. Of course, csv exports (directly from the battery tester) and informative reports can be created.
The system is completed by a USB interface and an integrated RFID transponder function.
The housing dimensions are just: 150mm x 98mm x 33m
Funktionen zur Messwertaufnahme:
- Multimeter
- Float
- Discharge
- Charge
- Resistance
- Temperature
- Density
- Interval U
- Interval U+I
