• Measuring principle volume flow
• Viscosity range 1 … 10 mm²/s (cSt)
• Medium temperature max. +120 °C
• Environmental temperature -20 … +85 °C
• Storage temperature -20 … +85 °C
• Output signal CANopen
• Supply voltage Ub 8.5 … 30 VDC
• Electrical measuring connector 5 pole device connector, M12 x 1
• Protection type (EN 60529 / IEC 529) IP 67 (screwed)
• Tightening torque 10 Nm (± 2 Nm)
• Calibration viscosity 30 mm²/s (cSt)
• Material turbine casing high-grade steel, passivated (X12CrNiS18 8)
• Material turbine wheel 1.4122 (for measuring range 1.0 … 10 l/min) 1.0718 (for all other measuring ranges)
• Material sealings FKM
• Material sensor casing 3.1645
• Current consumption max. 50 mA @ 24 VDC
• Interface CANopen (CIA-DS-301)
• CAN standard 2.0A (opt. 2.0B)
• Transmission rate 20 … 1,000 kBit/s
• Measured frequency (Hz) bytes 0 … 3
• Measured volume flow (l/min) bytes 4 … 7
• Resolution three decimal places
• Suitable measuring cable CAN cable

Not available anymore.

Datasheet