The pressure transmitter IDMP 321 sets new standards in the industrial class.
 Datasheet
|
|
Mounting instructions
|
|
User Manual
|
- nominal pressure: 0 ... 400 mbar up to 0 ... 40 bar
- accuracy: 0.1 % FSO
- thermal error in compensated range -20 … 80 °C: 0.2 % FSO TC 0.02 % FSO / 10 K
- turn-down 1:10
- communication interface for adjusting of offset, span and damping
| Datasheet |
| Mounting instructions |
| User Manual |
- nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar
- accuracy: 0.35 % (opt. 0.25 %) FSO
- CIP / SIP cleaning up to 150 °C
- vacuum resistant
- hygenic version
- diaphragm with low surface roughness
| Datasheet |
| Mounting instructions |
| User Manual |
Especially designed for use in hydraulic applications with high static and dynamic pressure, the transmitter is characterized by an excellent long term stability, also under fast changing pressure as well as positive and negative pressure peaks
| Datasheet |
| Mounting instructions |
| User Manual |
especially designed for use in hydraulic systems up to 2200 bar, thinfilm sensor, that is welded with the pressure port and meets high demands of foolproofness and reliability
| Datasheet |
| Mounting instructions |
| User Manual |
The industrial pressure transmitter IMP 335 is based on a stainless steel welded pressure sensor without fluid.
| Datasheet |
| Mounting instructions |
| User Manual |
features a G ¼" flush pressure port, designed for the use in a range of machinery including metering systems, ideal for measuring the pressure of viscous and pasty media, as only a small dead space is created
| Datasheet |
| Mounting instructions |
| User Manual |
Especially designed for the measurement of very low gauge pressure and for vacuum applications. Permissible media are non-aggressive, dry gases and non-aggressive, low viscos oils.
| Datasheet |
| Mounting instructions |
| User Manual |
Especially designed for rough conditions occurring especially in shipbuilding and offshore applications. All gaseous and liquid media, which are compatible with stainless steel 1.4404 (316L) respectively can be used.
| Datasheet |
The industrial pressure transmitter IMK 331 with ceramic sensor has been especially designed for pasty, polluted or aggressive media and for oxygen applications at low pressure range.
| Datasheet |
| Mounting instructions |
| User Manual |
The pressure transmitter IMK 331P is suitable for measuring the pressure of viscous and pasty media, where a totally flush pressure port is required.
| Datasheet |
| Mounting instructions |
| User Manual |
Designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights.
| Datasheet |
| Mounting instructions |
| User Manual |
The pressure transmitter IMK 351P has been designed for measuring small system pressure in the food industry and chemical industry.
| Datasheet |
| Mounting instructions |
| User Manual |
designed for typical applications in shipbuilding and offshore constructions as alternative to our pressure transmitter IMP 457 with piezoresistive stainless steel sensor
| Datasheet |
Developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media.
| Datasheet |
The precise pressure transmitter IX ACT ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability.
|
Datasheet
|
especially designed for the food industry, pharmacy and biotechnology and measures vacuum, gauge and absolute pressure of gases, steams and fluids up to 40 bar
| Datasheet |
The process pressure transmitter IXMP ci measures the pressure of gases, steam, dust and fluids. The special-developed capacitive ceramic sensor for this transmitter has a high overpressure capability and excellent media stability.
|
Datasheet
|
|
User Manual
|
|
User Manual
|
The pressure transmitters of the series IDS1-010 and IDS1-420 is for using in air and non aggressive gases. They measure difference- and absolute pressure, relative pressure and optionally velocity of flow. The analog output signal is 0-10 V or 4-20 mA. The 4-20 mA pressure transmitter is realised in two wire technic. For measurement of velocity of flow its possible to order the square root output. Because of the piezoresistive cell IDS1 reach a high reliability and precision. The dependence of zero signal from mounting position is very small. The resistance against overpressure is higher than by using other physical principles. The transmitters are housed in a robust aluminium package. This guarantees good EMC-properties. Optionally DS1 can be completed with electronic signal damping, power supply 24VAC or 230 VAC. For applications with higher pressure ranges we offer additionally to IDS1 the type IDS2.
|
Datasheet
|
The pressure transmitters of the series IDS1-010 and IDS1-420 is for using in air and non aggressive gases. They measure difference- and absolute pressure, relative pressure and optionally velocity of flow. The analog output signal is 0-10 V or 4-20 mA. The 4-20 mA pressure transmitter is realised in two wire technic. For measurement of velocity of flow its possible to order the square root output. Because of the piezoresistive cell IDS1 reach a high reliability and precision. The dependence of zero signal from mounting position is very small. The resistance against overpressure is higher than by using other physical principles. The transmitters are housed in a robust aluminium package. This guarantees good EMC-properties. Optionally DS1 can be completed with electronic signal damping, power supply 24VAC or 230 VAC. For applications with higher pressure ranges we offer additionally to IDS1 the type IDS2.
|
Datasheet
|
The IDM 331 is a differential pressure transmitter for industrial applications and is based on a piezoresistive stainless steel sensor, which can be pressurized on both sides with fluids or gases compatible with SST 1.4404 and 1.4435.
| Datasheet |
| Mounting instruction |
| User Manual |
especially designed for the process industry, can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc.
| Datasheet |
| User Manual |
| User Manual (Ex) |
The differential pressure transmitter XMD has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc.
|
Datasheet
|
- nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar
- accuracy: 0.25 % / 0.35 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
| Datasheet |
| User Manual |
| User Manual |
- High overload safety, optionally 40, 100 or 400 bar due to the metallic pressure element limit stop, without liquid-filled measuring cell
- Wide choice of special materials
- Compatible with switch contacts
- Case and wetted parts from stainless steel
- Scale ranges from 0 … 16 mbar
| Datasheet |
| User Manual |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar
- accuracy: 0.35 % (opt. 0.25 %) FSO
- rotatable and configurable display module
- indication of measured values on a 4-digit LED display
- 1, 2 or 4 independent PNP contacts, freely configurable
- configurable contacts (switch on / switch off points, hysteresis / window mode, switch on / switch off delay)
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar
- accuracy: 0.5 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- 1, 2 or 4 independent PNP contacts, freely configurable
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 60 bar up to 0 ... 400 bar
- accuracy: 0.5 % FSO
- 1, 2 or 4 independent PNP contacts, freely configurable
- rotatable and configurable display module
- indication of measured values on a 4-digit LED display
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 6 bar up to 0 ... 600 bar
- accuracy: 0.5 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- 1, 2 or 4 independent PNP contacts, freely configurable
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 10 mbar up to 0 ... 1000 mbar
- accuracy: 0.35 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- 1, 2 or 4 independent PNP contacts, freely configurable
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 600 bar up to 0 ... 2200 bar
- accuracy: 0,35 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- 1, 2 or 4 independent PNP contacts, freely configurable
- pressure sensor welded
- extremly robust and excellent longterm stability
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 6 bar up to 0 ... 600 bar
- accuracy: 0.5 % FSO
- 1 analog output and up to 2 contacts
- display and housing rotatable
- perfect for oxygen applications
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 2 bar up to 0 ... 400 bar
- accuracy: 1.5 % FSO
- display and housing rotatable
- up to 2 contacts
- configurable via display
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 6 mbar up to 0 ... 1000 mbar
- accuracy: 0,35 % FSO
- aluminium housing
- rotatable and configurable display module
- 4-digit LED display
- suited for non-aggressive gases and compressed air
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar
- accuracy: 0.25 % / 0.35 % FSO
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- 1 or 2 independent PNP contacts, freely configurable
| Datasheet |
| User Manual |
| User Manual |
- nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar
- accuracy: 0.35 % (opt. 0.25 %) FSO
- 1 or 2 independent PNP contacts, freely configurable
- indication of measured values on a 4-digit LED display
- rotatable and configurable display module
- hygienic process connections with flush stainless steel diaphragm
- configurable contacts (switch on / switch off points, hysteresis / window mode, switch on / switch off delay)
| Datasheet |
| User Manual |
| User Manual |
The high-quality stainless steel version has proven itself for measuring gaseous, liquid and aggressive media.
|
Datasheet
|
|
User Manual
|
- Up to 4 switch contacts per instrument
- Also available with case filling for high dynamic pressure loads or vibrations
- Instruments with inductive contacts for use in hazardous areas
- Instruments with contacts for PLC applications
- Instruments optionally available in safety version S3 per EN 837
| Datasheet |
| User Manual |
| User Manual |
- High reliability and long service life
- Wide choice of special materials
- Up to 4 switch contacts per instrument
- Also available with liquid filling for high dynamic pressure loads or vibrations
- Instruments with inductive contacts for use in hazardous areas
- Instruments with contacts for PLC applications
| Datasheet |
| User Manual |
- nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar
- accuracy: 0.5 % FSO
- rotatable and configurable display module
- indication of measured values on a 4-digit LED display
- 1 or 2 independent PNP contacts, freely configurable
| Datasheet |
| User Manual |
| User Manual |
especially designed for the food industry, pharmacy and biotechnology and measures vacuum, gauge and absolute pressure of gases, steams and fluids up to 40 bar
 Datenblatt
|
- Differential pressure measuring ranges from 0 … 16 mbar
- High working pressure (static pressure) and high overload safety up to 40 bar
- Also available with liquid-filled case for high dynamic pressure loads or vibrations
- Instruments with inductive contacts for use in hazardous areas
- Instruments with switch contact for PLC applications
|
Datasheet |
| User Manual |
| User Manual |
especially designed for the process industry, can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc.
| Datasheet |
| User Manual |
| User Manual (Ex) |
