Level Transmitter IPT133PP


  • PP housing (Polypropylene)
  • Smallest measuring range: 0…40 mbar / 0…400 mmH2O
  • Largest measuring range: 0…60 bar / 0…600 mH2O
  • Accuracy ≤ 0,2%
  • Analog output: 4…20 mA, 2-wires
    0…10 V, 3-wires
  • Optionally integrated PT100 / PT1000 Sensor for temperature measurement
  • Optionally with lightning protection against voltage peaks

Datasheet
Add to your Quote List

The  plastic  version of the  IPT133  pressure  transmitter is particularly suitable for media that lead to corrosion of  stainless  steel and thus  to  sensor failure.  Due to the material of the O-ring,  e.g. FFKM (Chemraz / Kalrez),  the sensor is resistant to most aggressive chemicals.  The ceramic sensor is resistant to aggressive and abrasive media. The capacitive measuring principle enables a very accurate and long-term stable measurement, even at lowest pressures and high overload resistance.  Our modular design concept provides a wide variety of products.  Feel free to contact us if you need a customization that is not listed in this data sheet.

 

Applications:
  • Chlorine and salt water applications
  • Gaseous media
  • Aggressive chemicals
  • Water
  • Waste water
  • Well / Deep well
  • Viscous and pasty media

 

 

Technical data:
Measuring range Smallest measuring range: 0…40 mbar / 400 mmH2O
Largest measuring range: 0…60 bar / 600 mH2O
Analog output 4…20 mA, 2-wires
0…10 V, 3-wires
Power supply 20 mA output: 9…30 V DC
10 V output: 15…30 V DC
Accuracy ≤ ± 0,2 % FS @ 25 °C
≤ ± 0,5 % FS @ 25°C ≤ 60 mbar
Long term stability ≤ ± 0,2 % FS / Year
Response time 200 ms – others on request
Swich-on time < 1 s
Temperature coefficient Zero: ≤ ± 0,02 % FS / Kelvin
Span: ≤ ± 0,02 % FS / Kelvin
Medium temperature -25…80 °C
Surrounding temperature -25…80 °C
Storage temperature -40…85 °C
Short-circuit resistance Permanent
Reverse polarity protection Protection against reverse polarity, but no function
Electromagnetic compatibility Interference emissions and immunity acc. to EN 61326
Vibration 10 g RMS (25…2000 Hz acc. to DIN EN 60068-2-6)
Shock 500 g / 1 ms acc. to DIN EN 60068-2-27
Wetted materials Housing: PP
Sensor: Ceramic Al2O3
Sensor seal: FPM (Viton), NBR, EPDM, FFKM (Chemraz / Kalrez)
Protection type IP 68
Weight Approx. 400 g with 5 m cable
Output Signal

1: 1.4404 stainless steel, 40 mm Ø, 2: Plastic PP¹, 3: G 1/2 A on top at cable outlet, ISO 228-1, 1.4404¹, 4: G 1/2 A on top and 11.8 mm borehole, ISO 228-1, 1.4404, 5: G 1/2 A on top and 11.8 mm borehole, ISO 228-1, 1.4404, 6: Plastic PVDF¹, 7: KE 1.4404 with stainless steel seal 1.4404, 8: G 1/2 A and G 1/4 internal, housing widened, for Serto fitting at the top, ISO 228-1, 1.4404¹, 9: 1.4404 stainless steel, 40 mm Ø, welded housing, 12 mm Serto fitting at the top
Measuring range

A8: 0…40 mbar / 0…4 kPa, B0: 0…50 mbar / 0…5 kPa, A9: 0…60 mbar / 0…6 kPa, 00: 0…100 mbar / 0…10 kPa, B1: 0…160 mbar / 0…16 kPa, 01: 0…200 mbar / 0…20 kPa, B2: 0…250 mbar / 0…25 kPa, 02: 0…300 mbar / 0…30 kPa, X5: 0…400 mbar / 0…40 kPa, 03: 0…500 mbar / 0…50 kPa, B7: 0…600 mbar / 0…60 kPa, 04: 0…1 bar / 0…100 kPa, 05: 0…1,6 bar / 0…160 kPa, B3: 0…2 bar / 0…200 kPa, 07: 0…2,5 bar / 0…250 kPa, 08: 0…4 bar / 0…400 kPa, 09: 0…6 bar / 0…600 kPa, 10: 0…10 bar / 0…1 MPa, 11: 0…16 bar / 0…1,6 MPa, B5: 0…20 bar / 0…2 MPa, 12: 0…25 bar / 0…2,5 MPa, 13: 0…40 bar / 0…4 MPa, 14: 0…60 bar / 0…6 MPa, W8: 0…400 mmWS, W0: 0…500 mmWS, W9: 0…600 mmWS, 50: 0…1 mWS, 51: 0…1,6 mWS, W1: 0…2 mWS, 52: 0…2,5 mWS, 53: 0…3 mWS, 54: 0…4 mWS, W2: 0…5 mWS, 55: 0…6 mWS, 56: 0…10 mWS, W3: 0…16 mWS, 57: 0…20 mWS, 58: 0…25 mWS, 59: 0…40 mWS, 60: 0…60 mWS, 61: 0…100 mWS, 62: 0…160 mWS, 63: 0…200 mWS, 64: 0…250 mWS, 99: Special Measuring Range
Cable lenght

002: 2 m cable, 005: 5 m cable, 010: 10 m cable, 050: 50 m cable, 100: 100 m cable, (Special lengths in meters available upon request)
Cable Material

0: PE cable (PT100/PT1000 not possible), 2: PUR cable, 4: HDPE cable, 6: FEP cable
Process Seal

1: FPM (Viton), standard, 3: NBR (Perbunan), 5: EPDM rubber, 6: FFKM (Chemraz / Kalrez)
Options

1: Cleaning agent, 2: Lightning protection (only possible with FEP cable), 3: DNV approval (only possible with FEP cable), 4: DH diesel/heating oil, 5: Laser protection








Level Transmitter IPT133PP
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Level Transmitter IPT133PP

    Level Transmitter IPT133PP
    • PP housing (Polypropylene)
    • Smallest measuring range: 0…40 mbar / 0…400 mmH2O
    • Largest measuring range: 0…60 bar / 0…600 mH2O
    • Accuracy ≤ 0,2%
    • Analog output: 4…20 mA, 2-wires
      0…10 V, 3-wires
    • Optionally integrated PT100 / PT1000 Sensor for temperature measurement
    • Optionally with lightning protection against voltage peaks

    Datasheet
    Add to your Quote List

    The  plastic  version of the  IPT133  pressure  transmitter is particularly suitable for media that lead to corrosion of  stainless  steel and thus  to  sensor failure.  Due to the material of the O-ring,  e.g. FFKM (Chemraz / Kalrez),  the sensor is resistant to most aggressive chemicals.  The ceramic sensor is resistant to aggressive and abrasive media. The capacitive measuring principle enables a very accurate and long-term stable measurement, even at lowest pressures and high overload resistance.  Our modular design concept provides a wide variety of products.  Feel free to contact us if you need a customization that is not listed in this data sheet.

     

    Applications:
    • Chlorine and salt water applications
    • Gaseous media
    • Aggressive chemicals
    • Water
    • Waste water
    • Well / Deep well
    • Viscous and pasty media

     

     

    Technical data:
    Measuring range Smallest measuring range: 0…40 mbar / 400 mmH2O
    Largest measuring range: 0…60 bar / 600 mH2O
    Analog output 4…20 mA, 2-wires
    0…10 V, 3-wires
    Power supply 20 mA output: 9…30 V DC
    10 V output: 15…30 V DC
    Accuracy ≤ ± 0,2 % FS @ 25 °C
    ≤ ± 0,5 % FS @ 25°C ≤ 60 mbar
    Long term stability ≤ ± 0,2 % FS / Year
    Response time 200 ms – others on request
    Swich-on time < 1 s
    Temperature coefficient Zero: ≤ ± 0,02 % FS / Kelvin
    Span: ≤ ± 0,02 % FS / Kelvin
    Medium temperature -25…80 °C
    Surrounding temperature -25…80 °C
    Storage temperature -40…85 °C
    Short-circuit resistance Permanent
    Reverse polarity protection Protection against reverse polarity, but no function
    Electromagnetic compatibility Interference emissions and immunity acc. to EN 61326
    Vibration 10 g RMS (25…2000 Hz acc. to DIN EN 60068-2-6)
    Shock 500 g / 1 ms acc. to DIN EN 60068-2-27
    Wetted materials Housing: PP
    Sensor: Ceramic Al2O3
    Sensor seal: FPM (Viton), NBR, EPDM, FFKM (Chemraz / Kalrez)
    Protection type IP 68
    Weight Approx. 400 g with 5 m cable
    Output Signal

    1: 1.4404 stainless steel, 40 mm Ø, 2: Plastic PP¹, 3: G 1/2 A on top at cable outlet, ISO 228-1, 1.4404¹, 4: G 1/2 A on top and 11.8 mm borehole, ISO 228-1, 1.4404, 5: G 1/2 A on top and 11.8 mm borehole, ISO 228-1, 1.4404, 6: Plastic PVDF¹, 7: KE 1.4404 with stainless steel seal 1.4404, 8: G 1/2 A and G 1/4 internal, housing widened, for Serto fitting at the top, ISO 228-1, 1.4404¹, 9: 1.4404 stainless steel, 40 mm Ø, welded housing, 12 mm Serto fitting at the top
    Measuring range

    A8: 0…40 mbar / 0…4 kPa, B0: 0…50 mbar / 0…5 kPa, A9: 0…60 mbar / 0…6 kPa, 00: 0…100 mbar / 0…10 kPa, B1: 0…160 mbar / 0…16 kPa, 01: 0…200 mbar / 0…20 kPa, B2: 0…250 mbar / 0…25 kPa, 02: 0…300 mbar / 0…30 kPa, X5: 0…400 mbar / 0…40 kPa, 03: 0…500 mbar / 0…50 kPa, B7: 0…600 mbar / 0…60 kPa, 04: 0…1 bar / 0…100 kPa, 05: 0…1,6 bar / 0…160 kPa, B3: 0…2 bar / 0…200 kPa, 07: 0…2,5 bar / 0…250 kPa, 08: 0…4 bar / 0…400 kPa, 09: 0…6 bar / 0…600 kPa, 10: 0…10 bar / 0…1 MPa, 11: 0…16 bar / 0…1,6 MPa, B5: 0…20 bar / 0…2 MPa, 12: 0…25 bar / 0…2,5 MPa, 13: 0…40 bar / 0…4 MPa, 14: 0…60 bar / 0…6 MPa, W8: 0…400 mmWS, W0: 0…500 mmWS, W9: 0…600 mmWS, 50: 0…1 mWS, 51: 0…1,6 mWS, W1: 0…2 mWS, 52: 0…2,5 mWS, 53: 0…3 mWS, 54: 0…4 mWS, W2: 0…5 mWS, 55: 0…6 mWS, 56: 0…10 mWS, W3: 0…16 mWS, 57: 0…20 mWS, 58: 0…25 mWS, 59: 0…40 mWS, 60: 0…60 mWS, 61: 0…100 mWS, 62: 0…160 mWS, 63: 0…200 mWS, 64: 0…250 mWS, 99: Special Measuring Range
    Cable lenght

    002: 2 m cable, 005: 5 m cable, 010: 10 m cable, 050: 50 m cable, 100: 100 m cable, (Special lengths in meters available upon request)
    Cable Material

    0: PE cable (PT100/PT1000 not possible), 2: PUR cable, 4: HDPE cable, 6: FEP cable
    Process Seal

    1: FPM (Viton), standard, 3: NBR (Perbunan), 5: EPDM rubber, 6: FFKM (Chemraz / Kalrez)
    Options

    1: Cleaning agent, 2: Lightning protection (only possible with FEP cable), 3: DNV approval (only possible with FEP cable), 4: DH diesel/heating oil, 5: Laser protection








    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info