Druck PDCR 300 (PANDA) – Precision Pressure Sensor – Aerospace Pressure Sensor

from 460.00 €

plus VAT

Designed for demanding aerospace and industrial test applications
Piezoresistive silicon technology – refined over more than 45 years
No microprocessor – ensures excellent temperature stability up to +150 °C
Compact, analog sensor with 4-wire millivolt output
Total accuracy: ±3% Full Scale over the range -55 °C to +150 °C
Pressure ranges: 110 kPa (1.1 bar) to 35 MPa (350 bar), absolute
Typical output: 0 to 120 mV (ratiometric to supply voltage)
Supply voltage: 2.5 to 15 VDC
Wetted materials: 316L stainless steel, 17-4PH & Inconel 625
Pressure connection: M5x0.8-6g
Media compatibility depends on pressure range (see datasheet)
Proof pressure: 1.5× FS / Burst pressure: 2.0× FS
Thermally insulated cable: 24 AWG, PTFE insulated
Electrical isolation: >100 MΩ at 500 VDC
Input impedance: >2000 Ohms / Output impedance: 5000 Ohms (nominal)
Ideal for hydraulics, barometric measurements, and aerospace test systems

Datasheet

The PDCR 300, also known as PANDA, is a high-stability, analog pressure sensor specifically designed for demanding aerospace, hydraulics, and industrial test environments. Built with proven piezoresistive silicon technology, it delivers exceptional accuracy over an extremely wide temperature range – all without a microprocessor. This ensures excellent long-term stability and resistance to thermal influences, making it ideal for use in harsh and dynamic conditions.

Key Features at a Glance

Operating temperature range from –55 °C to +150 °C
Total accuracy: ±3% full scale over the entire temperature range
No microprocessor – ensures excellent long-term stability
Analog 4-wire millivolt output (ratiometric)
Pressure ranges from 110 kPa to 35 MPa (absolute)
Typical output: 0 to 120 mV
Compact and lightweight design for easy integration
Robust wetted materials: 316L stainless steel, 17-4PH, Inconel 625

Typical Applications

Aerospace test benches and simulation systems
Hydraulic pressure monitoring and control
Barometric and absolute pressure measurement
High-temperature industrial environments
OEM integration in pressure calibration systems

Special Advantages

Purely analog – no microprocessor or software errors
Excellent temperature performance up to +150 °C
Compact form factor – easy to install in tight spaces
Ideal for safety-critical applications that require pure analog output

Technical Specifications

Category	Specification
Pressure Ranges	110 kPa to 35 MPa (absolute)
Output Signal	0 to 120 mV (ratiometric to supply voltage)
Supply Voltage	2.5 to 15 VDC
Total Accuracy	±3% FS (–55 °C to +150 °C)
Long-Term Stability	Excellent – analog-only design ensures stability
Media Compatibility	Depends on range – see datasheet
Wetted Materials	316L, 17-4PH, Inconel 625
Pressure Connection	M5x0.8-6g
Proof Pressure	1.5× FS
Burst Pressure	2.0× FS
Electrical Isolation	>100 MΩ at 500 VDC
Cable	24 AWG, PTFE-insulated, temperature resistant
Input Impedance	>2000 Ohms
Output Impedance	5000 Ohms (nominal)

Pressure Range	0 bis 35 MPa Absolut, 0 bis 28 MPa Absolut, 0 bis 21 MPa Absolut, 0 bis 14 MPa Absolut, 0 bis 10 MPa Absolut, 0 bis 7 MPa Absolut, 0 bis 4 MPa Absolut, 0 bis 2 MPa Absolut, 0 bis 1,7 MPa Absolut, 0 bis 1,4 MPa Absolut, 0 bis 1 MPa Absolut, 0 bis 700 kPa Absolut, 0 bis 500 kPa Absolut, 0 bis 350 kPa Absolut, 0 bis 230 kPa Absolut, 0 bis 200 kPa Absolut, 0 bis 110 kPa Absolut
NLH&R (at room temperature)	±0,3 % FS BSL, ±0,2 % FS BSL
Output	0 bis 120 mV, 0 bis 60 mV
Part Number	300TI11M0033–1, 300SI11M0033–1, 300RI11M0033–1, 300PI11M0033–1, 300NI11M0033–1, 300MI11M0033–1, 300LI11M0033–1, 300KI11M0033–1, 300JI11M0033–1, 300HI11M0033–1, 300GI11M0033–1, 300FI11M0033–1, 300EI11M0033–1, 300DI11M0033–1, 300CI11M0033–1, 300BI11M0033–1, 300AI11M0033–1

Datasheets

Druck PDCR 300 (PANDA) – Precision Pressure Sensor - Aerospace Pressure Sensor

Technical advice: 03303 / 50 40 66

Technical advice for this product