Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available.
 Datasheet |
| User Manual |
Each Button Seal Process Adapter is made to order depending on the provided process mounting port sizing. Flange attachments are available as one piece solid construction, threaded, or threaded & welded. Flange design is application specific and dependent on the process sizing needs of diameter, thickness, bolt-hole diameter, mounting bolt pattern.
|
Datasheet
|
The cable assemblies provide the electrical hookup from the transducer to the display instrumentation. The assemblies consist of a transducer mating connector and a length of shielded, 6 conductor cable with stripped leads.
|
Datasheet
|
Selectable transducer output sensitivity Standard 6 pin Bendix connector 5 step linear output 0 – 100% Identifies faulty components in a measurement loop
| Datasheet |
| User Manual |
The Dynisco Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole and the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. M10 and M18 kits are also available.
|
Datasheet
|
- rugged but easy to carry
- weight 3.9 kg only
- accuracy +/- 0.1%
- battery powered > 200 days
- multiple pressure adaptors available
- pressure range of 0 - 700 bar
- switch selectable bar / PSI / kPA
- memory function up to 900 measurements
- serial communications
- various display and test functions
| Datasheet |
| User Manual |
- Mains-independent thanks to battery supply (battery life: 2000 hours in continuous operation)
- Pressure range 0 - 700bar
- various pressure ports available
- Display of the pressure in 13 different units
- Accuracy +/- 0.05% FSO
- Resolution 100 mbar with 700 bar version
- Versions 200/350 bar final pressure value on request
| Datasheet |
- Pressure range: 0 - 700 bar
- Max. Permitted pressure: FS + 10%
- Resolution: 100 mBar (10 mBar at pressure range = 200 bar)
- Accuracy: ± 0.05% f.s. E. (at t = 0 °C to +50 °C) +/- 1 digit
- Measuring rate: 500 ms (2 Hz)
- Units: including Bar / PSI / kPA / mH2O (a total of 13 different units, adjustable on the display)
- Heated pressure port : 1/2" 20UNF or M18 x 1.5 (other ports on request)
- Temperature at the pressure port: Adjustable from RT to +400°C on the built-in PID temperature controller
- Oil volume: 57 ml
- Type of oil: olive oil/HLP 22 BP
- Power supply: 3 V battery, type CR 2430
- Battery life: 2000 hours of continuous use
- Interface: RS485, connecting cable K-114-A with USB port optionally available
- Power supply for heating and sensor supply: 115 V AC or 230 V AC
- Sensor supply (test object): via integrated power pack and plug or socket
- Protection class: IP 65
| Datasheet |
| User Manual |
- Pressure range 0-700bar
- Pressure port 1/2"20UNF or M18x1.5 (others on request)
- Accuracy <0.5% FS
- Display pressure in 13 different units
- Battery operation for pressure display (mains voltage required for heating pressure port)
- Battery: standard button cell, service life: >2000h in continuous operation
- Optional data transfer to PC/notebook of the generated print via external converter possible
- Oil volume 57ml (HLP22BP/olive oil)
- Measuring interval 0.5 seconds
- CE compliant/RoHS compliant
- DKD certificate optional
- Ambient conditions: 0...50°C/5...95% rel. humidity
- Dimensions (LxWxH): approx. 470 x170 x 280 mm
- Weight: approx. 7.2 kg, with case approx. 13 kg
| Datasheet |
| User Manual |
Sensor Accessories for Dynisco Sensors
“Sensor accessories” for Dynisco sensors include components and tools necessary for correct installation, connection and integration of pressure, temperature or process sensors. Accessories can include adapters, protection sleeves, cables, connectors, mounting flanges or calibration/test modules. They ensure that sensors operate reliably and safely, even under demanding industrial conditions.
Questions & Answers on Sensor Accessories
What is considered sensor accessory?
Adapters, threaded fittings or flanges, protective or immersion sleeves, cables and connectors, mounting hardware, and sometimes seals or calibration aids.
Why is accessory important?
Because correct mounting and proper connection ensure accurate measurements and safe operation — improper installation can lead to errors, leaks or damage.
Can accessories extend the sensor’s application range?
Yes — for example protective sleeves for corrosive media or high temperatures, or adapters to fit different process interfaces or installation conditions.
Does the accessory need to match the sensor type precisely?
Yes — often adapters or flanges are designed for specific sensor series or dimensions to guarantee functionality, sealing and safety.
How is accessory installed?
Using standard process connections (threads, flanges), with seals or mounting rings if necessary; cables/connectors mounted as required — often together with protective or mounting elements.
When should accessories be used?
When sensors are installed in harsh environments, with corrosive media, high temperature / pressure, or when special mounting conditions (long sensor shaft, remote cable routing, protective housing) are needed.
What are the risks without correct accessory?
Measurement errors, leaks, premature wear or failure, safety hazards — overall reduced measurement reliability and operational safety.
Who needs sensor accessories?
Operators of plants using sensors — especially in plastic processing, mechanical engineering, process industries or any demanding industrial environment where sensors undergo strong conditions.